The main differences between البولي إيثيلين فائق الوزن الجزيئي (UHMWPE) sheets and High-Density Polyethylene (HDPE) sheets lie in their molecular structure, mechanical properties, and applications. Below is a detailed comparison:
1. Molecular Weight & Structure
| الممتلكات | UHMWPE | البولي إيثيلين عالي الكثافة |
|---|---|---|
| Molecular Weight | 3–6 million g/mol | 200,000–500,000 g/mol |
| Chain Length | Extremely long polymer chains | Shorter chains compared to UHMWPE |
| Crystallinity | High (up to 85%) | Moderate (60–70%) |
- UHMWPE has much longer polymer chains, giving it superior impact resistance and wear properties.
- البولي إيثيلين عالي الكثافة has a more standard molecular weight, making it easier to process but less durable.
2. Mechanical & Physical Properties
| الممتلكات | UHMWPE | البولي إيثيلين عالي الكثافة |
|---|---|---|
| Tensile Strength | Higher (up to 50 MPa) | Lower (20–30 MPa) |
| مقاومة الصدمات | Excellent (won’t crack under high stress) | Good, but inferior to UHMWPE |
| مقاومة التآكل | Extremely high (best among plastics) | معتدل |
| معامل الاحتكاك | Very low (self-lubricating) | Low, but higher than UHMWPE |
| مقاومة المواد الكيميائية | Excellent (resists acids, alkalis, solvents) | Good, but slightly less resistant |
| نطاق درجة الحرارة | -200°C to +80°C | -50°C to +60°C |
- UHMWPE is 15x more abrasion-resistant than carbon steel and outperforms HDPE in sliding wear applications.
- البولي إيثيلين عالي الكثافة is stiffer but more prone to cracking under repeated impact.
3. Processing & Fabrication
| الممتلكات | UHMWPE | البولي إيثيلين عالي الكثافة |
|---|---|---|
| Melt Flow | Very poor (does not melt easily) | Better flow for injection molding |
| Machinability | Can only be compression-molded or machined | Easier to extrude, mold, and weld |
| التكلفة | More expensive | Cheaper and more widely available |
- UHMWPE is difficult to process using standard plastic molding techniques due to its ultra-high viscosity.
- البولي إيثيلين عالي الكثافة is more versatile for manufacturing (e.g., blow molding, injection molding).
4. Applications
| التطبيق | UHMWPE | البولي إيثيلين عالي الكثافة |
|---|---|---|
| Marine & Dock Fenders | ✅ (Best for high-impact zones) | ⚠️ (Suitable for lighter use) |
| Conveyor Liners & Chutes | ✅ (Superior wear resistance) | ⚠️ (Limited to low-abrasion use) |
| الغرسات الطبية | ✅ (Used in joint replacements) | ❌ (Not biocompatible enough) |
| Chemical Tanks & Piping | ✅ (Highly chemical-resistant) | ✅ (Commonly used) |
| Packaging & Bottles | ❌ (Too expensive) | ✅ (Main material for bottles) |
البولي إيثيلين عالي الكثافة is widely used in consumer goods, packaging, and low-stress structural parts.
UHMWPE is preferred for high-performance industrial applications (e.g., mining, marine, medical).
